Spot UV Business Cards

  • 0 Review
$ 158.00
Includes free shipping Australia wide for $ 0.00
Stock Printed Sides Quantity
Business Card Size
My Artwork
Upload Files Here
Accepted file types: .pdf .eps .ai .jpg .tiff .psd .docx
Make a selection

Spot UV Business Card Printing

A Spot UV coating or 'varnish' will bring your business card to life! When Spot UV varnish is applied to specific areas (or spots) on your print job, the extremely shiny and glossy texture draws attention and enhances these specific sections of your business card. Our spot uv cards are printed on our super sturdy heavyweight artboard and when the spot uv varnish is applied on top of the matt laminated business card, the results are spectacular! This finish achieves a high contrast between the extremely reflective glossy Spot UV coating and the luxurious smooth matt laminate surface. A Spot UV varnish will transform your business card into a premium piece setting you apart from your competitors.

Card Features:

  • Super Sturdy Heavyweight 420gsm
  • Coated artboard
  • Matt laminated 2 sides, spot uv 1 side
  • CMYK printing 1 side, or CMYK printing 2 sides
  • Optional rounded corners
  • Free delivery Australia wide

Perfect For:

  • Great for Business Cards
  • Premium Cards
  • Promotional Cards
  • Loyalty Cards

Need Assistance?


Contact us via our form to the side and we will respond as soon as possible.

CALL US on 1300 739 300

Call us today and our staff will assist you with any questions that you may have.

Artwork Guidelines

Spot UV Business Card File Setup
When setting up your document, we require the spot uv finish to be supplied on a separate .PDF in PMS102. THE SPOT UV AREA MUST BE SUPPLIED IN VECTOR FORMAT.

Artwork Setup Spot UV
File 1:  Front CMYK Printing
All printed areas (no spot uv on this file). 
IMPORTANT: All fonts must be outlined. 
Artwork Setup Spot UV
File 2:  Front Spot UV FInish
Show all the spot uv areas in PMS102. No CMYK printing to be supplied on this file.
IMPORTANT: Spot UV areas should be at least 0.6mm thick. Spot uv area in vector format only.
Artwork Setup Spot UV
File 3: Back CMYK Printing
All printed areas (no spot uv on this file). 
IMPORTANT: All fonts must be outlined.

Download a design template

Ind InDesign
Psd Photoshop

Artwork Setup Business CardsStandard 90mm x 55mm Card Setup

Business Card Artwork Setup Bleed Bleed Area = 96mm x 61mm
If you wish to print colour to the edge of your card, please include an extra 3mm of colour (bleed) around the entire artwork.

NBC BC Artwork Setup Trim Trim Area = 90mm x 55mm
This is where we cut your cards.

NBC BC Artwork Setup Safe Area Safe Area = 84mm x 49mm
It's a good idea to keep all important text and graphics within the 'safe area' otherwise they may be cut off.

CMYK Colour Mode

Setup your artwork and graphics in CMYK (Cyan, Magenta, Yellow and Black) colour mode. This will ensure that you avoid any unexpected colour changes. Please convert any RGB or SPOT images to CMYK before supplying your file. 

 Black Break Downs
Default Black

Black:  C0%, M0%, Y0%, B100%
BACKGROUNDS (larger 30mm area)
Rich Black: C30%, M20%, Y20%, B100% 
Rich Blue Black: C40%, M0%, Y0%, B100% 
Refrain from using this black in any artwork as it may result in drying and/or scuffing issues.

Artwork Resolution

All files must be supplied at a minimum of 300dpi (dots per inch) at full size. Images such as photos which appear in your artwork must also have a minimum resolution of 300dpi. Images that have a lower resolution may result in a pixilated or fuzzy finish. REMEMBER – images taken from the Internet are only 72dpi and are not suitable for print.

 Outline or Embed Fonts
Outline Embedd Fonts

Make sure that all fonts are outlined or embedded within your file. This means that we can print your file even if we don't have your fonts installed on our computers. This will reduce the possibilities of fonts not displaying as they should and not being printed the way you had proposed.